Quincy, MA 02170
Line Scan and Area Scan Lights - LSL Series
|
|
Line Scan and Area Scan Lights Features: Projected beam width from 4 to 10 mm @ 50 mm distance. Visible spectrum, UV and IR. We use several different types of internal diffusers and collimating rod lenses to maximize the illuminance at the specified working distance, and to achieve the required width of the illuminated area. Lengths from 3" to 48" in 3" increments. Extremely low heat dissipation. All line scan and area scan lights have embedded electronics (no controller required). Threaded 1/4-20 mounting holes on the back. Line Scan and Area Scan Lights in Machine Vision Lighting and Visual Inspection: Web inspection and imaging, barcodes readers, printed circuit board inspection, surface inspection and imaging, surface defects detection, optical character recognition, print quality verification, laser etched symbols recognition. Our line scan and area scan lights are fully sealed and washable, suitable for machine vision lighting in clean room, semiconductor, pharmaceutical and food processing applications. |
|
|
Line Scan and Area Scan Illumination: When inspecting or imaging highly reflective surfaces, or non-glossy (diffuse) surfaces covered or wrapped in transparent reflective foil, position the line scan light at an angle to the target so the the specular reflections are directed away from the camera or the observer. Line scan lights feature highly collimated beam of light, and are mainly intended for line scan imaging, but with four different types of lenses and four different internal diffusers we use, we can configure the optical part of the line scan light to project a wider beam of light at the specified working distance. To illuminate larger areas in machine vision lighting or inspection applications, consider using Diffuse Linear Lights or Broad Area Flood Lights. |
| Typical Illuminance and Light Beam Width (LSL1250-WHT-) : |
|
Distance [mm] Illuminance [Lux] Beam Width [mm] |
50 40,000 4 |
100 26,600 14 |
150 16,100 22 |
200 10,950 30 |
400 4,350 70 |
600 2,600 110 |
800 1,860 150 |
1,000 1,340 190 |
| Dimensions and Mounting : |
|
1/4-20 Mounting Holes: 3" and 6" 1 in the center 9" and 12" 2 at 4" intervals 18" and 24" 3 at 6" intervals 36" and 48" 4 at 8" intervals |
LSL1250 D = 2.65" (67 mm) strain relief L = 0.75" (19 mm) connector L = 1.9" (48 mm) |
|
| Environmental : | Electrical: |
|
Operating Temperature: |
-10 deg C to +45 deg C (14 to 113 deg F) |
I[mA] |
3" 80 |
6" 140 |
9" 200 |
12" 260 |
18" 380 |
24" 500 |
36" 740 |
48" 980 |
| Color Codes: | Ordering: |
|
Color Red Green Blue White UV IR Non-Standard |
Code 660 530 470 WHT 395 850 Specify Wavelength |
Wavelength 660 nm 530 nm 470 nm - 395 nm 850 nm - |
Series - Color Code - Length - Power Connection Example: LSL1250-WHT-36-CS Power Connection Options: PT - "piggy tail" (6 ft shielded cable with strain relief) CS - sealed connector and cordset with 6 ft shielded cable |
|
To order or inquire about options, non-standard and custom Line Scan and Area Scan Lights : Call: 1-617-773-4230 Email: info@illuminationcontrol.com or sales@illuminationcontrol.com |