Diffuse, dome-like, no glare illumination for line scan applications dealing with glossy surfaces or products wrapped in transparent reflective plastic or foil
Illumination Control, Inc. Call: 617-773-4230 E-mail: info@illuminationcontrol.com sales@illuminationcontrol.com
48 Royal Street
Quincy, MA 02170

Machine vision, inspection and microscope led lights


Line Scan and Area Scan Lights
Mini Ring Lights
Diffuse Linear Front and Back Lights
High Power Led Broad Area Flood Lights
Lensed Led Ring Lights
Diffuse Dome Lights
Led Ring Lights
Led Spot Lights
Diffuse On Axis (Coaxial) Lights
Darkfield Ring Lights
High Power Led Linear Array Lights
Hybrid Diffuse Ring Lights
Lensed Led Gooseneck Lights
Linear Array Broad Area Lights Surface Inspector Machine vision, inspection and microscope led lights

Diffuse Line Scan Lights - DLSL1500 Series
Embedded electronics. Adjustable intensity. Visible spectrum, UV, IR
  Diffuse Line Scan Lights Features:

Light uniformity +/- 5%
Visible spectrum, UV and IR
Embedded electronics (no need for external controller)
Light intensity adjustable from 0 to maximum
Extremely low heat dissipation
Lengths from 6" to 48" in 6" increments
Top opening (slot) 2.4 mm or 3.2 mm
1/4-20 threaded mounting holes on both ends 		  Diffuse Line Scan Light DLSL1500
 
  Diffuse Line Scan Light Illumination Structure:

Diffuse line scan light (linear dome) is an integrating light source. The inner surface of the linear dome has so much microscopic roughness that led light rays are reflected (scattered) in many different directions. Highly diffused light leaving the dome does not form glare even on very reflective surfaces. Shadows cast by parts of 3-dimensional objects are either reduced or eliminated. Specular reflections are greatly reduced and contrast is created between specular and diffuse surfaces. 		  Diffuse Line Scan Light Applications:

Diffuse line scan light (linear dome) provide bright uniform light for line scan applications dealing with flat and 3-dimensional objects with mixed diffuse and glossy surfaces. Examples: inspection of components in plastic, highly reflective bags, glossy label inspection, inspection of laser etched or engraved symbols on glossy materials, printed circuit board inspection, surface defects detection, optical character recognition (OCR), print quality verification (PQV), detection of packaging tears, etc.
 
    Typical Illuminance (White Leds):
 
    Distance [inch]

  Illuminance [Lux]
 0

20,800 		.1

18,700 		.2

16,000 		.3

13,700 		.4

11,700 		.5

10,200 		.6

9,000 		.7

8,000 		.8

7,100 		.9

6,500 		1.0

6,000
 
    Illumination Pattern:     Dimensions:
  Diffuse Line Scan Light Illumination Pattern   Diffuse Line Scan Light Dimensions
    Environmental :     Electrical:
 
Operating Temperature:
-10 deg C to +45 deg C
(14 to 113 deg F) 		  Current @ 24 VDC = Length [inch] x 40 mA + 20 mA
 
    Color Codes:     Ordering:
 
Color

Red
Green
Blue
White
UV
IR
Non-Standard 		Code

660
530
470
WHT
395
850
Specify Wavelength 		Wavelength

660 nm
530 nm
470 nm
-
395 nm
850 nm
- 		  Series - Color Code - Length - Power Connection - Slot

Example: DLSL1500-WHT-36-CS-3.2

Power Connection Options:

PT - "piggy tail" (6 ft shielded cable with strain relief)
CS - sealed connector and cordset with 6 ft shielded cable
 
  To order or inquire about options, non-standard and custom Diffuse Line Scan Lights :
Call: 1-617-773-4230
Email: info@illuminationcontrol.com or sales@illuminationcontrol.com